Contact Dr Filomeno Martina
- Email: f.martina@cranfield.ac.uk
- ORCID
Background
Dr Filomeno Martina is the COO of Masara, a global firm organising premium music events and experiences. Previously, he was the founding CEO of WAAM3D Ltd, a spin-out company of Cranfield University commercialising the Wire+Arc Additive Manufacturing (WAAM) process. Historically, he has looked after operations, finance, legal, and marketing.
Prior his current role, he was Senior Lecturer in Additive Manufacturing at the Welding Engineering and Laser Processing Centre, Cranfield University, where he was the course director of the first MSc on Metal Additive Manufacturing in Europe. He is the winner of the 2022 FAME Jr award, and has received further awards from BAE Systems (2010, 2018), Royal Aeronautical Society (2013), European Space Agency (2015), and The Welding Institute (2018).
He has held also non-executive director positions.
Publications
Articles In Journals
- Abbaszadeh M, Ventzke V, Neto L, Riekehr S, Martina F, .... (2021). Compression behaviour of wire+ arc additive manufactured structures. Metals, 11(6)
- Syed AK, Zhang X, Davis AE, Kennedy JR, Martina F, .... (2021). Effect of deposition strategies on fatigue crack growth behaviour of wire+ arc additive manufactured titanium alloy Ti-6Al-4V. Materials Science and Engineering: A, 814(May)
- Priarone PC, Pagone E, Martina F, Catalano AR & Settineri L. (2020). Multi-criteria environmental and economic impact assessment of wire arc additive manufacturing. CIRP Annals, 69(1)
- Davis AE, Hönnige JR, Martina F & Prangnell PB. (2020). Quantification of strain fields and grain refinement in Ti-6Al-4V inter-pass rolled wire-arc AM by EBSD misorientation analysis. Materials Characterization, 170
- Lunt D, Ho A, Davis AE, Harte A, Martina F, .... (2020). The effect of loading direction on strain localisation in wire arc additively manufactured Ti–6Al–4V. Materials Science and Engineering A, 788
- Donoghue J, Davis AE, Daniel CS, Garner A, Martina F, .... (2020). On the observation of annealing twins during simulating β-grain refinement in Ti–6Al–4V high deposition rate AM with in-process deformation. Acta Materialia, 186
- Dirisu P, Ganguly S, Mehmanparast A, Martina F & Williams SW. (2020). Analysis of fracture toughness properties of wire + arc additive manufactured high strength low alloy structural steel components. Materials Science and Engineering: A, 765
- Lunt D, Ho A, Davis A, Martina F, Hönnige J, .... (2020). Microscopic strain localisation in WAAM Ti-6Al-4V during uniaxial tensile loading. MATEC Web of Conferences, 321
- Colomo AG, Wood D, Martina F & Williams SW. (2020). A comparison framework to support the selection of the best additive manufacturing process for specific aerospace applications. International Journal of Rapid Manufacturing, 9(2/3)
- Garcia-Colomo A, Wood D, Martin F & Williams SW. (2020). A comparison framework to support the selection of the best additive manufacturing process for specific aerospace applications. International Journal of Rapid Manufacturing, 9(3)
- Marinelli G, Martina F, Ganguly S & Williams SW. (2019). Grain refinement in an unalloyed tantalum structure by combining Wire+Arc additive manufacturing and vertical cold rolling. Additive Manufacturing, 32
- Dryburgh P, Pieris D, Martina F, Patel R, Sharples S, .... (2019). Spatially resolved acoustic spectroscopy for integrity assessment in wire-arc additive manufacturing. Additive Manufacturing, 28
- Marinelli G, Martina F, Ganguly S & Williams SW. (2019). Effect of shielding gas composition and welding speed on autogenous welds of unalloyed tungsten plates. International Journal of Refractory Metals and Hard Materials, 85
- Davis AE, Breheny CI, Fellowes JW, Nwankpa U, Martina F, .... (2019). Mechanical performance and microstructural characterisation of titanium alloy-alloy composites built by wire-arc additive manufacture - WITHDRAWN DUPLICATE: see https://dspace.lib.cranfield.ac.uk/handle/1826/14554. Materials Science and Engineering: A, 765
- Gisario A, Kazarian M, Martina F & Mehrpouya M. (2019). Metal additive manufacturing in the commercial aviation industry: A review. Journal of Manufacturing Systems, 53
- Abbaszadeh M, Hönnige JR, Filomeno M, Kashaev N, Colegrove PA, .... (2019). Numerical investigation of the effect of rolling on the localized stress and strain induction for wire + arc additive manufactured structures. Journal of Materials Engineering and Performance, 28(8)
- Michel F, Lockett HL, Ding J, Martina F, Marinelli G, .... (2019). A modular path planning solution for Wire + Arc Additive Manufacturing. Robotics and Computer-Integrated Manufacturing, 60
- Marinelli G, Martina F, Ganguly S & Williams SW. (2019). Microstructure, hardness and mechanical properties of two different unalloyed tantalum wires deposited via wire + arc additive manufacture. International Journal of Refractory Metals and Hard Materials, 83
- Pardal G, Martina F & Williams SW. (2019). Laser stabilization of GMAW additive manufacturing of Ti-6Al-4V components. Journal of Materials Processing Technology, 272
- Marinelli G, Martina F, Ganguly S & Williams SW. (2019). Development of Wire + Arc additive manufacture for the production of large-scale unalloyed tungsten components. International Journal of Refractory Metals and Hard Materials, 82
- Marinelli G, Martina F, Lewtas H, Hancock D, Mehraban S, .... (2019). Microstructure and thermal properties of unalloyed tungsten deposited by Wire + Arc Additive Manufacture. Journal of Nuclear Materials, 522
- Marinelli G, Martina F, Ganguly S, Williams SW, Lewtas H, .... (2019). Functionally graded structures of refractory metals by Wire Arc Additive Manufacturing. Science and Technology of Welding and Joining, 24(5)
- Ho A, Zhao H, Fellowes JW, Martina F, Davis AE, .... (2019). On the origin of microstructural banding in Ti-6Al4V wire-arc based high deposition rate additive manufacturing. Acta Materialia, 166
- Martina F, Ding J, Williams SW, Caballero A, Pardal G, .... (2018). Tandem Metal Inert Gas process for high productivity Wire Arc Additive Manufacturing in stainless steel. Additive Manufacturing, 25
- Xu X, Ganguly S, Ding J, Philip D, Martina F, .... (2018). Improving mechanical properties of wire + arc additively manufactured maraging steel through plastic deformation enhanced aging response. Materials Science and Engineering: A, 747
- Ríos S, Colegrove PA, Martina F & Williams SW. (2018). Analytical process model for wire + arc additive manufacturing. Additive Manufacturing, 21
- Xu X, Ganguly S, Ding J, Guo S, Williams SW, .... (2017). Microstructural evolution and mechanical properties of maraging steel produced by wire + arc additive manufacture process. Materials Characterization, 143
- Busachi A, Erkoyuncu JA, Colegrove PA, Martina F, Watts C, .... (2017). A review of additive manufacturing technology and cost estimation techniques for the defence sector. CIRP Journal of Manufacturing Science and Technology, 19
- Lockett HL, Ding J, Williams SW & Martina F. (2017). Design for wire + arc additive manufacture: design rules and build orientation selection. Journal of Engineering Design, 28(7-9)
- Colegrove PA, Donoghue J, Martina F, Gu J, Prangnell PB, .... (2016). Application of bulk deformation methods for microstructural and material property improvement and residual stress and distortion control in additively manufactured components. Scripta Materialia, 135
- Zhang X, Martina F, Ding J, Wang X & Williams SW. (2016). Fracture toughness and fatigue crack growth rate properties in wire + arc additive manufactured Ti-6Al-4V. Fatigue & Fracture of Engineering Materials & Structures, 40(5)
- Donoghue J, Antonysamy AA, Martina F, Colegrove PA, Williams SW, .... (2016). The effectiveness of combining rolling deformation with Wire–Arc Additive Manufacture on β-grain refinement and texture modification in Ti–6Al–4V. Materials Characterization, 114
- Williams SW, Martina F, Addison AC, Ding J, Pardal G, .... (2016). Wire + Arc Additive Manufacturing. Materials Science and Technology, 32(7)
- Martina F, Roy MJ, Szost BA, Terzi S, Colegrove PA, .... (2016). Residual stress of as-deposited and rolled Wire + Arc Additive Manufacturing Ti–6Al–4V components. Materials Science and Technology, 32(14)
- Szost BA, Terzi S, Martina F, Boisselier D, Prytuliak AA, .... (2015). A comparative study of additive manufacturing techniques: Residual stress and microstructural analysis of CLAD and WAAM printed Ti-6Al-4V components. Materials & Design, 89
- Martina F, Colegrove PA & Williams SW. (2015). Microstructure of interpass rolled wire + arc additive manufacturing Ti-6Al-4V components. Metallurgical and Materials Transactions A, 46(12)
- Ding J, Colegrove P, Martina F, Williams S, Wiktorowicz R, .... (2015). Development of a laminar flow local shielding device for wire + arc additive manufacture. Journal of Materials Processing Technology, 226
- Colegrove PA, Coules HE, Fairman J, Martina F, Kashoob T, .... (2013). Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rolling. Journal of Materials Processing Technology, 213(10)
- Martina F, Mehnen J, Williams SW, Colegrove P & Wang F. (2012). Investigation of the benefits of plasma deposition for the additive layer manufacture of Ti–6Al–4V. Journal of Materials Processing Technology, 212(6)