Contact Dr Konstantinos Salonitis
- Tel: +44 (0) 1234 758347
- Email: k.salonitis@cranfield.ac.uk
- Twitter: @SalonitisK
- Linkedin: http://uk.linkedin.com/pub/konstantinos-salonitis/44/b1b/602
Areas of expertise
- Advanced Casting Science and Technologies
- Composites
- Manufacturing Systems
- Product and Service Design
- Sustainable Manufacturing
- Welding and Laser Processing
Background
Dr Konstantinos (Kostas) Salonitis (Dip Eng, MSc, PhD, MBA, PGCAP, CEng MIMechE, FHEA) graduated from University of Patras with a Diploma in Mechanical Engineering in 2001 and was awarded a PhD in Manufacturing Processes in 2006. In 2014 he completed a Master in Business Administration from the Hellenic Open University. He has worked as a Research Engineer at the University of Patras in a number of research projects funded by the CEU. He has participated in more than 10 European Commission funded projects as Project Manager or Technical Site Manager.
From 2006 to 2010, Dr Salonitis was the Project Manager of an FP6 integrated project (FUTURA - www.futura-ip.eu) on multi-functional materials processing for the automotive industry.
He joined Cranfield University in February 2012 as a Lecturer in Manufacturing Systems, progressing to Senior Lecturer in October 2015 and Reader in October 2017. IDr Salonitis has published more than 160 research papers in major international journals and internationally referred conferences and authored two books.
Dr Salonitis was a Research Affiliate of the CIRP (2007-2013), he is a Chartered Engineer and a Member of the IMechE and the Technical Chamber of Greece. He is also a Fellow of the Higher Education Academy.
Current activities
- Simulation and modelling of manufacturing processes
- Energy efficiency of manufacturing processes and systems
- Environmental impact assessment of manufacturing processes
- Abrasive machining processes
- Rapid Manufacturing.
Clients
Publications
Articles In Journals
- Papanikolaou M & Salonitis K (2019) Fractal roughness effects on nanoscale grinding, Applied Surface Science, 467-468 (February) 309-319.
- Okorie O, Turner C, Salonitis K, Charnley F, Moreno M, Tiwari A & Hutabarat W (2018) A decision-making framework for the implementation of remanufacturing in rechargeable energy storage system in hybrid and electric vehicles, Procedia Manufacturing, 25 142-153.
- Okorie O, Salonitis K, Charnley F, Moreno M, Turner C & Tiwari A (2018) Digitisation and the circular economy: A review of current research and future trends, Energies, 11 (11) Article No. 3009.
- Okorie O, Salonitis K, Charnley F & Turner C (2018) A systems dynamics enabled real-time efficiency for fuel cell data-driven remanufacturing, Journal of Manufacturing and Materials Processing, 2 (4) Article No. 77.
- Luna J, Addepalli S, Salonitis K & Makatsoris H (2018) Assessment of an emerging aerospace manufacturing cluster and its dependence on the mature global clusters, Procedia Manufacturing, 19 26-33.
- Addepalli S, Pagalday G, Salonitis K & Roy R (2018) Socio-economic and demographic factors that contribute to the growth of the civil aviation industry, Procedia Manufacturing, 19 2-9.
- Pagone E, Salonitis K & Jolly M (2018) Energy and material efficiency metrics in foundries, Procedia Manufacturing, 21 421-428.
- Almutairi AM, Salonitis K & Al-Ashaab A (2018) Assessing the leanness of a supply chain using multi-grade fuzzy logic: a healthcare case study, International Journal of Lean Six Sigma , Early online.
- Alefari M, Fernández Barahona A & Salonitis K (2018) Modelling manufacturing employees' performance based on a system dynamics approach, Procedia CIRP, 72 438-443.
- Papanikolaou M, Pagone E, Georgarakis K, Rogers K, Jolly M & Salonitis K (2018) Design optimisation of the feeding system of a novel counter-gravity casting process, Metals, 8 (10) Article No. 817.
- Salonitis K, Chantzis D & Kappatos V (2017) A hybrid finite element analysis and evolutionary computation method for the design of lightweight lattice components with optimized strut diameter, International Journal of Advanced Manufacturing Technology, 90 (9-12) 2689-2701.
- Kappatos V, Asfis G, Salonitis K, Tzitzilonis V, Avdelidis NP, Cheilakou E & Theodorakeas P (2017) Theoretical assessment of different ultrasonic configurations for delamination defects detection in composite components, Procedia CIRP, 59 29-34.
- Davé A, Ball P & Salonitis K (2017) Factory eco-efficiency modelling: data granularity and performance indicators, Procedia Manufacturing, 8 479-486.
- Salonitis K, Jolly M & Zeng B (2017) Simulation based energy and resource efficient casting process chain selection: a case study, Procedia Manufacturing, 8 67-74.
- Omogbai O & Salonitis K (2017) The implementation of 5S lean tool using system dynamics approach, Procedia CIRP, 60 380-385.
- Gonçalves MT & Salonitis K (2017) Lean assessment tool for workstation design of assembly lines, Procedia CIRP, 60 386-391.
- Litos L, Borzillo F, Patsavellas J, Cockhead D & Salonitis K (2017) Management tool design for eco-efficiency improvements in manufacturing - a case study, Procedia CIRP, 60 500-505.
- Yi Y, Salonitis K, Tsoutsanis P, Litos L & Patsavelas J (2017) Improving the curing cycle time through the numerical modeling of air flow in industrial continuous convection ovens, Procedia CIRP, 63 499-504.
- Alefari M, Salonitis K & Xu Y (2017) The role of leadership in implementing lean manufacturing, Procedia CIRP, 63 756-761.
- Salonitis K (2017) A hybrid cellular automata-finite element model for the simulation of the grind-hardening process, International Journal of Advanced Manufacturing Technology, 93 (9-12) 4007-4013.
- Almanei M, Salonitis K & Xu Y (2017) Lean implementation frameworks: The challenges for SMEs, Procedia CIRP, 63 750-755.
- Kolios AJ, Rodriguez-Tsouroukdissian A & Salonitis K (2016) Multi-criteria decision analysis of offshore wind turbines support structures under stochastic inputs, Ships and Offshore Structures, 11 (1) 38-49.
- Salonitis K, Zeng B, Ahmad Mehrabi H & Jolly M (2016) The challenges for energy efficient casting processes, Procedia CIRP, 40 24-29.
- Salonitis K, Jolly M, Zeng B & Mehrabi H (2016) Improvements in energy consumption and environmental impact by novel single shot melting process for casting, Journal of Cleaner Production, 137 1532-1542.
- Kolios A, Mytilinou V, Salonitis K & Lozano-Minguez E (2016) A comparative study of multiple-criteria decision-making methods under stochastic inputs, Energies, 9 (7) Article No. 566.
- Davé A, Salonitis K, Ball P, Adams M & Morgan D (2016) Factory eco-efficiency modelling: framework application and analysis, Procedia CIRP, 40 214-219.
- Tsiolikas A, Kechagias J, Salonitis K & Mastorakis N (2016) Optimization of cut surface quality during CNC plasma arc cutting process, International Journal of Systems Applications, Engineering & Development, 10 305-308.
- Omogbai O & Salonitis K (2016) A lean assessment tool based on systems dynamics, Procedia CIRP, 50 106-111.
- Rusev SJ & Salonitis K (2016) Operational excellence assessment framework for manufacturing companies, Procedia CIRP, 55 272-277.
- Pagone E, Jolly M & Salonitis K (2016) The development of a tool to promote sustainability in casting processes, Procedia CIRP, 55 53-58.
- Oleghe O & Salonitis K (2016) Variation Modeling of Lean Manufacturing Performance Using Fuzzy Logic Based Quantitative Lean Index, Procedia CIRP, 41 608-613.
- Kappatos V, Georgoulas G, Avdelidis N & Salonitis K (2016) Tidal stream generators, current state and potential opportunities for condition monitoring, Vibroengineering Procedia, 8 285-293.
- Salonitis K (2016) Design for additive manufacturing based on the axiomatic design method, International Journal of Advanced Manufacturing Technology, 87 (1) 989-996.
- Salonitis K, D’Alvise L, Schoinochoritis B & Chantzis D (2016) Additive manufacturing and post-processing simulation: laser cladding followed by high speed machining, International Journal of Advanced Manufacturing Technology, 85 (9) 2401-2411.
- Salonitis K & Kolios A (2015) Experimental and numerical study of grind-hardening-induced residual stresses on AISI 1045 Steel, International Journal of Advanced Manufacturing Technology, 79 (9) 1443-1452.
- Salonitis K (2015) Energy efficiency assessment of grinding strategy, International journal of energy sector management, 9 (1) 20-37.
- Salonitis K, Vidon B & Chen D (2015) A decision support tool for the energy efficient selection of process plans, International Journal of Mechatronics and Manufacturing Systems, 8 (1-2) 63-83.
- Schoinochoritis B, Chantzis D & Salonitis K (2015) Simulation of metallic powder bed additive manufacturing processes with the finite element method: A critical review, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231 (1) 1-22.
- D'Alvise L, Chantzis D, Schoinochoritis B & Salonitis K (2015) Modelling of part distortion due to residual stresses relaxation: An aeronautical case study, Procedia CIRP, 31 447-452.
- Chen D, Heyer S, Ibbotson S, Salonitis K, Steingrímsson JG & Thiede S (2015) Direct digital manufacturing: definition, evolution, and sustainability implications, Journal of Cleaner Production, 107 615-625.
- Oleghe O & Salonitis K (2015) Improving the efficacy of the lean index through the quantification of qualitative lean metrics, Procedia CIRP, 37 42-47.
- Salonitis K & Al Zarban S (2015) Redesign optimization for manufacturing using additive layer techniques, Procedia CIRP, 36 193-198.
- Salonitis K, Stavropoulos P & Kolios A (2014) External grind-hardening forces modelling and experimentation, International Journal of Advanced Manufacturing Technology, 70 (1-4) 523-530.
- Salonitis K (2014) Modular design for increasing assembly automation, CIRP Annals - Manufacturing Technology, 63 (1) 189-192.
- Kolios A, Srikanth S & Salonitis K (2014) Numerical Simulation of Material Strength Deterioration due to Pitting Corrosion, Procedia CIRP, 13 230-236.
- Salonitis K & Kolios A (2014) Reliability assessment of cutting tool life based on surrogate approximation methods, International Journal of Advanced Manufacturing Technology, 71 (5-8) 1197-1208.
- Oleghe O & Salonitis K (2014) Schedule performance measurement based on statistical process control charts, International Journal of Engineering Management and Economics, 4 (3/4) 194-212.
- Salonitis K (2014) On Surface Grind Hardening Induced Residual Stresses, Procedia CIRP, 13 264-269.
- Guzmán Ferradás P & Salonitis K (2013) Improving changeover time: a tailored SMED approach for welding cells, Procedia CIRP, 7 598-603.
- Mishra VK & Salonitis K (2013) Empirical estimation of grinding specific forces and energy based on a modified werner grinding model, Procedia CIRP, 8 287-292.
- Salonitis K & Stavropoulos P (2013) On the integration of the CAx systems towards sustainable production, Procedia CIRP, 9 115-120.
- Salonitis K, Stavropoulos P, Fysikopoulos A & Chryssolouris G (2013) CO2 laser butt-welding of steel sandwich sheet composites, International Journal of Advanced Manufacturing Technology, 69 (1-4) 245-256.
- Paralikas J, Salonitis K & Chryssolouris G (2013) Robust optimization of the energy efficiency of the cold roll forming process, International Journal of Advanced Manufacturing Technology, 69 (1-4) 461-481.
- Salonitis K & Ball P (2013) Energy Efficient Manufacturing from Machine Tools to Manufacturing Systems, Procedia CIRP, 7 634-639.
- Salonitis K, Stavropoulos P, Fysikopoulos A & Chryssolouris G (2013) CO2 laser butt-welding of steel sandwich sheet composites, International Journal of Advanced Manufacturing Technology, 69 (1-4) 245-256.
- Paralikas J, Salonitis K & Chryssolouris G (2013) Energy efficiency of cold roll forming process, International Journal of Advanced Manufacturing Technology, 66 (9-12) 1271-1284.
- Salonitis K & Kolios A (2013) Reliability assessment of cutting tools life based on advanced approximation methods, Procedia CIRP, 8 397-402.
- Salonitis K & Vatousianos S (2012) Experimental Investigation of the Plasma Arc Cutting Process, Procedia CIRP, 3 287-292.
- Fysikopoulos A, Anagnostakis D, Salonitis K & Chryssolouris G (2012)
An Empirical Study of the Energy Consumption in Automotive Assembly
, Procedia CIRP, 3 477-482. - Fysikopoulos A, Stavropoulos P, Salonitis K & Chryssolouris G (2012) Energy Efficiency Assessment of Laser Drilling Process, Physics Procedia, 39 776-783.
- Paralikas J, Salonitis K & Chryssolouris G (2011) Investigation of the effect of roll forming pass design on main redundant deformations on profiles from AHSS, International Journal of Advanced Manufacturing Technology, 56 (5-8) 475-491.
- Salonitis K, Stavropoulos P & Chryssolouris G (2010) Nanotechnology for the needs of the automotive industry, International Journal of Nanomanufacturing, 6 (1-4) 99-110.
- Paralikas J, Salonitis K & Chryssolouris G (2010) Optimization of roll forming process parameters-a semi-empirical approach, International Journal of Advanced Manufacturing Technology, 47 (9-12) 1041-1052.
- Salonitis K, Pandremenos J, Paralikas J & Chryssolouris G (2010) Multifunctional materials: engineering applications and processing challenges, International Journal of Advanced Manufacturing Technology, 49 (5-8) 803-826.
- Stavropoulos P, Stournaras A, Salonitis K & Chryssolouris G (2010) Experimental and theoretical investigation of the ablation mechanisms during femptosecond laser machining, International Journal of Nanomanufacturing, 6 (1-4) 55-65.
- Salonitis K, Drougas D & Chryssolouris G (2010) Finite Element Modeling of Penetration Laser Welding of Sandwich Materials, Physics Procedia, 5 (B) 327-335.
- Stournaras A, Salonitis K & Chryssolouris G (2010) Optical emissions for monitoring of the percussion laser drilling process, International Journal of Advanced Manufacturing Technology, 46 (5-8) 589-603.
- Salonitis K, Stournaras A, Stavropoulos P & Chryssolouris G (2009) Thermal modeling of the material removal rate and surface roughness for die-sinking EDM, International Journal of Advanced Manufacturing Technology, 40 (3-4) 316-323.
- Stournaras A, Salonitis K, Stavropoulos P & Chryssolouris G (2009) Theoretical and experimental investigation of pulsed laser grooving process, International Journal of Advanced Manufacturing Technology, 44 (1-2) 114-124.
- Paralikas J, Salonitis K & Chryssolouris G (2009) Investigation of the effects of main roll-forming process parameters on quality for a V-section profile from AHSS, International Journal of Advanced Manufacturing Technology, 44 (3-4) 223-237.
- Stournaras A, Stavropoulos P, Salonitis K & Chryssolouris G (2009) An investigation of quality in CO2 laser cutting of aluminum, CIRP Journal of Manufacturing Science and Technology, 2 (1) 61-69.
- Drakopoulos S, Salonitis K, Tsoukantas G & Chryssolouris G (2009) Environmental Impact of Ship Hull Repair, International Journal of Sustainable Manufacturing, 1 (3) 361-374.
- Pandremenos J, Paralikas J, Salonitis K & Chryssolouris G (2009) Modularity concepts for the automotive industry: A critical review, CIRP Journal of Manufacturing Science and Technology, 1 (3) 148-152.
- Salonitis K, Chondros T & Chryssolouris G (2008) Grinding wheel effect in the grind-hardening process, International Journal of Advanced Manufacturing Technology, 38 (1-2) 48-58.
- Salonitis K & Chryssolouris G (2007) Thermal analysis of grind-hardening process, International Journal of Manufacturing Technology and Management, 12 (1/2/3) 72-92.
- Salonitis K, Stournaras A, Tsoukantas G, Stavropoulos P & Chryssolouris G (2007) A theoretical and experimental investigation on limitations of pulsed laser drilling, Journal of Materials Processing Technology, 183 (1) 96-103.
- Salonitis K & Chryssolouris G (2007) Cooling in grind-hardening operations, International Journal of Advanced Manufacturing Technology, 33 (3-4) 285-297.
- Lalas C, Tsirbas K, Salonitis K & Chryssolouris G (2007) An analytical model of the laser clad geometry, International Journal of Advanced Manufacturing Technology, 32 (1-2) 34-41.
- Tsoukantas G, Salonitis K, Stournaras A, Stavropoulos P & Chryssolouris G (2007) On optical design limitations of generalized two-mirror remote beam delivery laser systems: the case of remote welding, International Journal of Advanced Manufacturing Technology, 32 (9-10) 932-941.
- Chryssolouris G, Tsirbas K & Salonitis K (2005) An analytical, numerical, and experimental approach to grind hardening, Journal of Manufacturing Processes, 7 (1) 1-9.
- Chryssolouris G, Stavropoulos P, Tsoukantas G, Salonitis K & Stournaras A (2004) Nanomanufacturing processes: a critical review, International Journal of Materials and Product Technology, 21 (4) 331-348.
- Salonitis K & Omogbai O Hybrid simulation modelling of the human-production process interface in lean manufacturing systems, International Journal of Lean Six Sigma , Early online.
Conference Papers
- Jolly MR, Salonitis K, Charnley F, Ball P, Mehrabi H & Pagone E (2017) Energy efficiency status-quo at UK foundries: the “small-is-beautiful” project. In: Light Metals 2017 (TMS Annual Meeting & Exhibition), San Diego, CA, 26 February - 2 March 2017.
- Jolly MR & Salonitis K (2017) Primary manufacturing, engine production and on-the-road CO2: how can the automotive industry best contribute to environmental sustainability. In: 38th International Vienna Motor Symposium, 2017, Vienna, 27-28 April 2017.
- Jolly MR, Salonitis K & Pagone E (2017) A comparison of embodied and process energy and CO2 for different processes used in the manufacture of a major automotive power train component. In: COM2017 - Annual Conference of Metallurgists, Vancouver, BC, 27-30 August 2017.
- Jolly M, Ahmad Mehrabi H & Salonitis K (2016) Sustainable investment casting. In: 14th World Investment Casting Conference, Paris, 7-8 April 2016.
- Salonitis K & Tsinopoulos C (2016) Drivers and Barriers of Lean Implementation in the Greek Manufacturing Sector. In: 49th CIRP Conference on Manufacturing Systems: Factories of the Future in the digital environment, Stuttgart, 25-27 May 2016.
- Omogbai O & Salonitis K (2016) Manufacturing System Lean Improvement Design Using Discrete Event Simulation. In: 49th CIRP Conference on Manufacturing Systems: Factories of the Future in the digital environment, Stuttgart, 25-27 May 2016.
- Continente J, Shehab E, Salonitis K, Tammineni S & Chinchapatnam P (2015) Cooling and capability analysis methodology: towards development of a cost model for turbine blades film cooling holes. In: 22nd ISPE international conference on concurrent engineering (CE2015), Delft, 20-23 July 2015.
- Davé A, Ball PD, Salonitis K & Astfalck C (2015) Factory Eco-Efficiency Modelling: Framework Development and Testing. In: 2nd International Conference on Sustainable Design and Manufacturing (SDM 2015), Seville, 12 April 2015.
- Salonitis K & Kolios A (2015) Axiomatic design based assessment of offshore wind turbine support structures. In: 6th International Conference on Mechanics and Materials in Design (M2D), Ponta Delgada, 26-30 July 2015.
- Zeng B, Jolly M & Salonitis K (2014) Manufacturing cost modeling of castings produced with CRIMSON process. In: Shape Casting: 5th International Symposium 2014, San Diego, California, 16 February 2014.
- Zeng B, Jolly MR & Salonitis K (2014) Investigating the energy consumption of casting process by multiple life cycle method. In: 1st International Conference on Sustainable Design and Manufacturing (SDM14), 2014, Cardiff, Wales, 28-30 April 2014.
- Kolios A & Salonitis K (2013) Surrogate modelling for reliability assessment of cutting tools. In: Advances in manufacturing technology XXVII : proceedings of the 11th International Conference on Manufacturing Research, 2013, Cranfield, 19-20 September 2013.
- Zeng B, Salonitis K & Jolly M (2013) Comparison of the environmental impact of the CRIMSON process with normal sand casting process. In: Advances in manufacturing technology XXVII : proceedings of the 11th International Conference on Manufacturing Research, 2013, Cranfield, 19 September 2013.
- Chantzis D, Paralikas J, Salonitis K & Chryssolours G (2013) On the profile intensive BIW design and optimization - The front module case study. In: Advances in manufacturing technology XXVII : proceedings of the 11th International Conference on Manufacturing Research, 2013, Cranfield, 19 September 2013.
- Kolios A, Howe S, Asproulis A & Salonitis K (2013)
Environmental impact assessment of the manufacturing of a commercial aircraft
. In: Advances in manufacturing technology XXVII : proceedings of the 11th International Conference on Manufacturing Research, 2013, Cranfield, 19 September 2013. - Salonitis K (2012)
Efficient Grinding Processes: An energy efficiency point of view
. In: Advances in Manufacturing Technology XXVI, 2012 - 10th International Conference on Manufacturing Research (ICMR12), Birmingham, 11 September 2012. - Salonitis K, Pandremenos J, Paralikas J & Chryssolouris G (2009) Multifunctional Materials Used in Automotive Industry: A Critical Review. In: First Conference on Engineering Against Fracture, Patras, 28-30 May 2008.
- Fysikopoulos A, Salonitis K & Chryssolouris G (2009) Energy efficiency of laser based manufacturing processes. In: 28th International Congress on Applications of Lasers and Electro-Optics (ICALEO 2009), Orlando, FL, 2-5 November 2009.
- Salonitis K, Paralikas J & Chryssolouris G (2009) Roll Forming of AHSS: Numerical Simulation and Investigation of Effects of Main Process Parameters on Quality. In: First Conference on Engineering Against Fracture, Patras, 28-30 May 2008.
- Pandremenos J, Salonitis K & Chryssolouris G (2009) CO2 laser welding of AHSS. In: 28th International Congress on Applications of Lasers and Electro-Optics (ICALEO 2009), Orlando, FL, 2-5 November 2009.
- Stournaras A, Salonitis K & Chryssolouris G (2009) Acoustic and optical sensing for monitoring of blind laser drilling geometrical features. In: 28th International Congress on Applications of Lasers and Electro-Optics (ICALEO 2009), Orlando, FL, 2-5 November 2009.
- Tsoukantas G, Salonitis K, Stavropoulos P & Chryssolouris G (2003) An overview of 3D laser materials' processing concepts. In: 3rd GR-I International Conference on New Laser Technologies and Applications, Patras, 5-8 September 2002.
- Salonitis K, Tsoukantas G, Stavropoulos P & Stournaras A (2003) A critical review of stereolithography process modeling. In: 1st International Conference on Advanced Research in Virtual and Rapid Prototyping - VR@P 2003, Leiria, 1-4 October 2003.
- Chryssolouris G, Stavropoulos P, Tsoukantas G, Salonitis K & Stournaras A (2003) Nanomanufacturing processes: A critical review. In: 1st International Conference on Advanced Research in Virtual and Rapid Prototyping - VR@P 2003, Leiria, 1-4 October 2003.
- Chryssolouris G, Tsoukantas G, Salonitis K, Stavropoulos P & Karagiannis S (2003) Laser machining modelling and experimentation - An overview. In: 3rd GR-I International Conference on New Laser Technologies and Applications, Patras, 5-8 September 2002.
Books
- Papanikolaou M, Pagone E, Salonitis K, Jolly M & Makatsoris C (2019) A computational framework towards energy efficient casting processes. In: Sustainable Design and Manufacturing 2018: Proceedings of the 5th International Conference on Sustainable Design and Manufacturing (KES-SDM-18), Cham: Springer, p. 263-276.
- Pagone E, Papanikolaou M, Salonitis K & Jolly M (2019) Metal casting energy efficient metrics for material selection of automotive parts. In: Sustainable Design and Manufacturing 2018: Proceedings of the 5th International Conference on Sustainable Design and Manufacturing (KES-SDM-18), Springer, p. 290-303.
- Pagone E, Salonitis K & Jolly M (2018) Energy-efficient casting processes. In: Innovations in Manufacturing for Sustainability, Springer, p. 77-98.
- Prabhakar A, Mielniccka J, Jolly M & Salonitis K (2018) Improving energy efficiency in direct method for continuous casting of lead sheets. In: Energy Technology 2018: Carbon Dioxide Management and Other Technologies, Springer, p. 121-132.
- Gonçalves M, Jolly M, Salonitis K & Pagone E (2018) Resource efficiency analysis of high pressure die casting process. In: Light Metals 2018, Springer International Publishing, p. 1041-1047.
- Pagone E, Jolly M, Salonitis K, (2017) A tool to promote sustainability in casting processes: development highlights. In: Sustainable Design and Manufacturing 2017: Selected papers on Sustainable Design and Manufacturing, Springer, p. 172-184.
- Pagone E, Jolly M & Salonitis K (2017) A tool to promote sustainability in casting processes: Development highlights. In: Sustainable Design and Manufacturing 2017: Selected Papers on Sustainable Design and Manufacturing, Springer, p. 172-184.
- Ahmad Mehrabi H, Jolly M & Salonitis K (2016) Methods of reducing materials' waste and saving energy in investment casting. In: Shape Casting: 6th International Symposium. Tiryakioglu M, Jolly M, Byczynski G (ed.), Hoboken, NJ, USA: Wiley, p. 69-76.
- Mehrabi H, Jolly M & Salonitis K. (2016) Road-mapping towards a sustainable lower energy foundry. In: Sustainable Design and Manufacturing 2016, Springer, p. 251-260.
- Salonitis K (2015) Grind Hardening Process. Springer International Publishing.
- Salonitis K, Paralikas J, Fysikopoulos A & Chryssolouris G (2014) Specific Energy. In: CIRP Encyclopedia of Production Engineering. Laperrière L, Reinhart G (ed.), Berlin Heidelberg: Springer-Verlag, p. 1124-1128.
- Salonitis K, Paralikas J & Chryssolouris G (2014) Roll Forming. In: CIRP Encyclopedia of Production Engineering. Laperrière L, Reinhart G (ed.), Berlin: Springer-Verlag, p. 1076-1079.
- Salonitis K (2014) Stereolithography. In: Comprehensive Materials Processing. Hashmi S (ed.), Amsterdam: Elsevier, p. 19-67.
- Salonitis K, Fysikopoulos A & Chryssolouris G (2014) Abrasive Material. In: CIRP Encyclopedia of Production Engineering. Laperrière L, Reinhart G (ed.), Berlin Heidelberg: Springer-Verlag, p. 1-6.
- Chryssolouris G, Stavropoulos P & Salonitis K (2013) Process of Laser Machining. In: Handbook of Manufacturing Engineering and Technology. Andrew Yeh-Ching Nee (ed.), Berlin Heidelberg: Springer London, p. 1-25.
- Chryssolouris G & Salonitis K (2011) Fundamentals of laser machining of composites. In: Machining technology for composite materials: Principles and practice. Hocheng H (ed.), Cambridge, UK: Woodhead Publishing Limited, p. 266-287.
- Salonitis K (2009) Life cycle evaluation. In: Design of sustainable product life cycles, Berlin: Springer Verlag, p. 55-81.